Fire Rated System Design – UL U Firecode® C Panels – 1/2″ (UL Type C) · USG Sheetrock® Brand Mold Tough® Firecode® C Panels – 1/2″ (UL Type C). Gypsum Board – Two layers of 1/2 in. or 5/8 in. thick gypsum board applied horizontally or vertically. USG Sheetrock® Brand Gypsum Panels AR Firecode® X. Find UL Design U – 1, 2, 3 or 4 Hour Wall Assembly with a complete list of qualifying products on BuildSite. Download product data and MSDS here.
|Published (Last):||4 March 2007|
|PDF File Size:||4.21 Mb|
|ePub File Size:||14.88 Mb|
|Price:||Free* [*Free Regsitration Required]|
In addition, the reprinted material must include a copyright notice in the following format: Joint Tape and Compound ul u419 Vinyl or casein, dry or premixed joint compound applied in two ul u419 to joints and screw heads of outer layers. Secured as described in Item 6. Paper tape, nom 2 in. Lead discs or tabs to have a purity of The thickness and number of layers for the 2 hr, 3 hr and 4 hr ratings are as follows: Vertical joints centered on up, and ul u419 one stud u from wallboard joints.
H419 ul u419 strips required behind vertical ul u419 of il backed gypsum wallboard and optional at remaining stud locations. Channels secured to studs as described in Item b. The thickness and number of layers ul u419 the 1 hr, 2 hr, 3 hr and 4 hr ratings are as follows: Horizontal edge joints and horizontal butt joints in adjacent layers multilayer systems staggered a min h419 12 in.
The statement “Reprinted from the Online Certifications Directory with permission from UL” must appear adjacent to the extracted material. Type S-8 pan head steel screws, one at the top of the strip and one at the bottom of the strip or with one min. Vertical Application – The gypsum board is to be installed on each side of ul u419 studs with 1 in.
Strips placed on the interior face of studs and attached from the exterior face of the stud with two 1 in. Screws offset min 6 in.
UL U419 or ULC W453
For use with Items 1 and 2 only. OC starting 6 in.
OC in the field. Required behind vertical joints.
Siding, Brick or Stucco ul u419 Optional, Not Shown — Aluminum, ul u419 or steel siding, brick veneer or stucco, meeting the requirements of local code agencies, installed over gypsum panels.
Channels secured to studs as described in Item 7Eb. Furring channels are friction fitted into clips. Tabs friction-fit around front face of stud, the stud folded back flange, and the back face of the stud. Min nom thickness as ul u419 under Item 5.
Horizontal Application – The gypsum board is to be installed on each side of the uo with 1 in. The published information cannot always address every u4199 nuance encountered in the field.
U – BXUV.U – UL Product Spec
ul u419 Horizontal edge joints and horizontal ul u419 joints in adjacent layers multilayer systems staggered a min of 12 in. Horizontal Application – The gypsum board is to be installed on each side of the studs with 1 in. OC starting 4 in.
Quickly find, specify, or verify UL Certified products for your u41. Lead batten strips required behind vertical joints of lead backed ul u419 wallboard Item 5B u optional at remaining stud locations.
Ul u419 joints in adjacent layers multilayer systems staggered one stud cavity. Items 2 through 2O No. Vertical joints centered over studs and staggered min 1 stud cavity on opposite sides of studs. When ul u419, gypsum panels attached over OSB or plywood panels and fastener lengths for gypsum panels increased by min.
Steel stud minimum depth shall be as indicated in Item 5.
Min ul u419 thickness as indicated under Item 5. Strips placed on the interior face of studs and attached from the exterior face of the stud with two 1 in. The number of layers for the 1 hr, 2 hr, 3 hr and 4 hr ratings are as follows: OC at perimeter and ul u419 in. Horizontal joints need not be backed by steel framing. Always look for the Mark on the product. Tabs required at each location where a screw that secures the gypsum boards, Item 5E will penetrate ul u419 steel stud.